If you suspect that your flight controller has a bad gyro (this is usually noticed could be due to bad flight performance) most of the time we find that it is not the gyro itself that has a fault. Most commonly the issue is caused by and not limited ...
Why you should test your FC before soldering So, you've just received a brand new, shiny, flight controller. Awesome! You're probably eager to get it installed and get up in the air, but hold your horses there - it's always best to test your ...
Always check before soldering Chances are you are looking at this page because you have an issue with your flight controller, hopefully you have already followed our suggestions on what to check before you solder your FC. As part of a flight ...
Experiencing power and LED issues with your flight controller can be challenging. Here's an enhanced guide to help you diagnose and resolve these problems: 1. Check Connections: Secure Wiring: Ensure all connections are firm and correctly oriented. ...
Problem: Mobula6 (Crazybee F4 Lite) flight controller settings have all been wiped, and the SPI receiver has lost bind. Sometimes if your battery gets over discharged (below 3.0V) and you still try to fly your quadcopter by running the motors it can ...