Betaflight VTX Tables and how to find what version of Smart Audio your VTX uses.

Betaflight VTX Tables and how to find what version of Smart Audio your VTX uses.

If you are stugging to setup the new VTX tables or get smart audio working properly on your betaflight board (betaflight V4.1+ ) then this video will help you.




This video goes over how you can use betaflight configurator to easily detect what version smart audio version your VTX is using and also you you can go about setting up your VTX table.  

    • Related Articles

    • BetaFlight Resource Mapping Guide

      As manufacturers are stuffing more and more features into flight controllers, we are increasingly seeing boards that have fewer pins available for accessories. The result is lost capabilities, such as: Not enough UART input/outputs Inability to fly ...
    • How to install/Flash Betaflight Firmware (GUI or DFU Mode)

      This is a quick guide that will walk you through the process of flashing betaflight firmware onto your flight controller What is a "Firmware Target" or "HEX File" in this context? Betaflight firmware is made to run on many different boards. So, it is ...
    • Betaflight Firmware Guide for iFlight BNF Drones

      Important Disclaimer More than 50% of our support work is linked to messed up firmware, flash-bricked flight controllers or misconfigured BNF drones. So don't waste your time or money, FPV quads are more fun flying than fixing... Before proceeding ...
    • How to troubleshoot your Motors and ESC (Betaflight)

      Problem:  One or more motors are not spinning up correctly when trying to fly your quadcopter. This is a fairly common issue pilots encounter with betaflight quads.  Sometimes this could be due to an incorrect flight controller setting, bad ...
    • How to setup BetaFlight Soft Serial

      What can we use Softserial for? Stuff that requires a UART connection but not timing critical, such as: SmartAudio, GPS SBUS ESC telemetry Smart Port With the limited number of UART’s on a flight controller (only 2 or 3 on F3/F4 boards), you can turn ...