How to check what Firmware is running on your Betaflight flight controller (firmware version and firmware target)
To check what firmware version and firmware target your board is using please follow the steps below:
- Connect your flight controller to your PC via USB
- Open up betaflight GUI and connect to your board
- Once connected, in the bottom right you will see what firmware version is running on our FC, and what target is on your board. The screenshot below shows an example of this.
Related Articles
How to install/Flash Betaflight Firmware (GUI or DFU Mode)
This is a quick guide that will walk you through the process of flashing betaflight firmware onto your flight controller What is a "Firmware Target" or "HEX File" in this context? Betaflight firmware is made to run on many different boards. So, it is ...Betaflight Firmware Guide for iFlight BNF Drones
Important Disclaimer More than 50% of our support work is linked to messed up firmware, flash-bricked flight controllers or misconfigured BNF drones. So don't waste your time or money, FPV quads are more fun flying than fixing... Before proceeding ...Troubleshooting Betaflight Flight Controller Power and LED Issues
Experiencing power and LED issues with your flight controller can be challenging. Here's an enhanced guide to help you diagnose and resolve these problems: 1. Check Connections: Secure Wiring: Ensure all connections are firm and correctly oriented. ...Loading CLI Defaults onto Your Betaflight Flight Controller/Drone: A Step-by-Step Guide
Important things to note when using CLI Dumps/Diff When using CLI dumps, there are several important things to keep in mind: Always make sure the version of Betaflight firmware on your board is the same version as that on the CLI Dump file. While you ...Flashing ArduPilot onto a Betaflight Flight Controller (UMT PD Drone)
This guide explains how to flash ArduPilot firmware onto a Betaflight-based flight controller, such as the F405 board used in the UMT PD Drone. ? Prerequisites Before you begin, download and install the following tools: STM32CubeProgrammer – ...