Mobula6 (Crazybee F4 Lite) settings are wiped, or lost bind to radio

Mobula6 (Crazybee F4 Lite) settings are wiped, or lost bind to radio

Problem:  Mobula6 (Crazybee F4 Lite) flight controller settings have all been wiped, and the SPI receiver has lost bind.
Sometimes if your battery gets over discharged (below 3.0V) and you still try to fly your quadcopter by running the motors it can actually cause a power brownout on the MCU that causes the EEPROM to get corrupted.  This results in all the user saved settings to be cleared on your flight controller.
For now you will need to connect to your FC and set all the parameters onto the flight controller again.  This includes configuring the RX and binding it again, setting up your flight modes etc.  Alternatively you can also just load the CLI dump from this Github Gist - https://gist.github.com/tropnevad/3a056f5602cc2ddced98fdab04e98919 
Happymodel are working on a permanent solution to this bug, but for now its best to set a low voltage alarm and make sure you land before the voltage drops too low.  If it does, do not move your radio sticks to try prevent this from wiping your EEPROM.

    • Related Articles

    • Channel / Gimbal Stick Jitter on Lite Radio 3

      If you have encountered any jitter when flying, or testing the channels of your of gimbal during your using the Lite Radio3， even the value of your gimbal jumped sharply when connecting the controller to the BETAFPV configurator This issue is usually ...

    • How to bind your betaflight SPI receiver via CLI (Frsky, Flysky)

      Many tiny whoop flight controllers that have a built in SPI receiver.  And given the small size it can be a real pain to press the bind button each time you need to bind your RX to it.  However with betaflight you can bind your RX via the CLI using a ...

    • Choosing a FPV Radio Controller, TX Module and Receiver

      Your radio is one place where a larger initial investment will go a long way, especially if you decide to stick with FPV long-term. When getting into FPV, your first purchase is most likely going to be your radio transmitter (or TX). The radio takes ...

    • Scratched Screen on Your Radio Control Transmitter? Here’s How to Fix It!

      Is Your Radio Control Transmitter Screen Scratched? If you've recently received a Frsky, FLysky, Radiomaster, Jumper, or another popular radio control transmitter and noticed what looks like scratches on the screen, don’t worry! This is a common ...

    • Happymodel Mobula6

      Hi there! If you're here, you're likely having issues with your Mobula6 VTX. Below are a few pointers from a support thread of ours which helped to resolve this issue for a number of our customers in the past. Firstly, make sure that you're not set ...