Scratched Screen on Your Radio Control Transmitter? Here’s How to Fix It!
Is Your Radio Control Transmitter Screen Scratched?
If you've recently received a Frsky, FLysky, Radiomaster, Jumper, or another popular radio control transmitter and noticed what looks like scratches on the screen, don’t worry! This is a common issue caused by a hidden screen protector that comes pre-installed to protect the display during shipping.
Why Does the Screen Appear Scratched?
Most radio control transmitters are equipped with a clear plastic screen protector to prevent damage during transit. Sometimes, this protector can shift or partially peel, making it seem like the screen is scratched. The scratches are usually just marks from the protector itself and not actual damage to the transmitter’s display.
How to Fix the Scratched Screen
1. Remove the Screen Protector
- Gently Peel: Start at a corner and slowly peel off the plastic protector using your fingernail or a soft tool like a plastic card.
- Avoid Scratching: Be cautious to prevent scratching the actual screen during removal.
2. Clean the Screen
- Use a soft, lint-free cloth to wipe the screen clean after removing the protector. This will remove any residual adhesive or minor marks left behind.
Replace the Screen Protector (Optional)
If you prefer to keep your screen protected, you can replace the original screen protector with a new one. Many transmitters include a spare protector, but if yours didn’t, you can purchase a compatible screen protector from our store.
Steps to Replace:
- Purchase a Compatible Protector: Ensure it matches your transmitter model.
- Apply Carefully: Follow the installation instructions to avoid bubbles or misalignment.
Additional Tips
- Handle with Care: Always handle your transmitter with clean hands and store it in a protective case to prevent future scratches.
- Check for Spare Protectors: Some models come with a spare screen protector. If yours did, use it as a backup or replacement.
Frequently Asked Questions (FAQ)
Q: Will removing the screen protector void my transmitter’s warranty?
A: No, removing the screen protector does not void your warranty. It’s simply an additional layer for protection during shipping.
Q: I still see scratches after removing the screen protector. What should I do?
A: If scratches remain, they are likely from the screen protector itself. These usually do not affect the functionality of your transmitter. However, if you experience display issues, please contact our Customer Support for assistance.
Q: Where can I find a replacement screen protector?
A: Replacement screen protectors are available on our Shop. Browse our selection or contact our support team for more information. As if we do not stock the specific one you need, we may be able to order it in with our next batch of radios from our supplier.
Related Articles
Choosing a FPV Radio Controller, TX Module and Receiver
Your radio is one place where a larger initial investment will go a long way, especially if you decide to stick with FPV long-term. When getting into FPV, your first purchase is most likely going to be your radio transmitter (or TX). The radio takes ...Channel / Gimbal Stick Jitter on Lite Radio 3
If you have encountered any jitter when flying, or testing the channels of your of gimbal during your using the Lite Radio3， even the value of your gimbal jumped sharply when connecting the controller to the BETAFPV configurator This issue is usually ...Hot Small Drone (VTX / Video Transmitter is getting very hot)
Heat in small quads/drones is usually perfectly normal and harmless. However it is suggested that you never leave your VTX plugged in for long periouds (longer than 30 seconds) without any airflow over them, 99% of units on the market do have some ...Solving Radio ELRS Version Mismatch: A Step-by-Step Guide
Are you facing difficulties with binding your ELRS radio and receiver? It could be due to a mismatch in the ELRS version. Don't worry! Our team has found a solution and has put together a detailed step-by-step guide to help you update your radio and ...Frsky Receiver, Transmitter and Firmware Compatibility Guide
If you are struggling to understand what Frsky equipment is compatible with what, this table below will hopefully help clear some things up for you. But before you get to the table here are some important notes: (OTX) means you need to be running the ...
Recent Articles
What is the Shipping Cost for My Order?
Curious about the shipping cost for your order? Here’s how to quickly estimate it, along with everything you need to know about our shipping options. How to Estimate Shipping Costs To get an accurate shipping quote for your order, follow these simple ...Super Payments FAQ
What is Super Payments? Super Payments is designed to provide a fast, secure, and seamless checkout experience while also rewarding you for your loyalty, earning cash rewards each time you shop with us. How It Works Choose Super Payments at checkout. ...What to Do if Your Payment Was Declined but You See Multiple Charges
Why Did This Happen? If your payment attempt was denied, but you still see charges on your card, you're likely experiencing a common scenario called pre-authorisation. Here’s why this might occur: You attempted to place an order, but it failed during ...How to Log Out of Your Unmanned Tech Account
If you need to log out of your Unmanned Tech account, follow these simple steps: Click on the Account Icon In the top right corner of the page, click on the account icon that looks like a small person. Select "Logout" From the dropdown menu, scroll ...Why Soldering is Essential in the FPV Hobby and How to Learn
Soldering is an essential skill for anyone diving into the FPV (First-Person View) drone hobby. Being proficient in soldering ensures that all electronic components of your drone are securely connected, which is crucial for reliable performance and ...