T-Pro Gimbal issues EdgeTX 2.7
Jumper advises;
"""
Currently, we find some users have gimbal issue after the firmware into EDGETX 2.7..
Please flash the firmware to openTX, take the SD card out (if there is SD card), re-do the calibration. The gimbal should be back to work.
"""
Related Articles
DJI O4 Pro Camera Not Working (Black Screen in Goggles)
If you experience a black screen in your goggles when using the DJI O4 Pro camera system, it's typically due to a physical issue like a pinched or damaged coaxial cable connecting the camera. Important Clarification: If you purchased the DJI O4 Pro ...
Understanding Pre-Activated DJI O4 / O4 Pro Air Units in Your Pre-Built Drone
Have You Noticed Your DJI O4 Air Unit is Already Activated? Here’s Why. If you've recently purchased a pre-built drone from us that's equipped with a DJI O4 or DJI O4 Pro Air Unit, you might notice upon setup that the Air Unit appears to be already ...
Resolving Card Payment Processing Issues
Experiencing a failed payment attempt can be frustrating, particularly when you're certain your credit card is functioning correctly. At Unmanned Tech, we recognize the importance of a smooth payment process and are here to assist you in resolving ...
Channel / Gimbal Stick Jitter on Lite Radio 3
If you have encountered any jitter when flying, or testing the channels of your of gimbal during your using the Lite Radio3， even the value of your gimbal jumped sharply when connecting the controller to the BETAFPV configurator This issue is usually ...
ToolkitRC WM150 - Common Issues and solutions
How to update firmware on your ToolkitRC WM150 The most common solution to 90% of the issues customers report with their ToolkitRC WM150 is solved by updating the firmware on your device. Apart from solving any possible issues, updating firmware is a ...