Which goggles and remote controllers are supported by the DJI O4 Air Unit series?

Which goggles and remote controllers are supported by the DJI O4 Air Unit series?

The following set-ups are compatible with the DJI O4 Air Unit Series.

  • DJI Goggles 3 / DJI Goggles N3 + DJI FPV Remote Controller 3.

  • DJI Goggles 2 / DJI Goggles Integra + DJI FPV Remote Controller 2

Please note that third-party flight goggles are not supported. The Series does support third-party remote controllers with other protocols, but an additional receiver is required.

To use the DJI FPV Remote Controller, the flight control protocol must be set to S.Bus.


    • Related Articles

    • Troubleshooting Guide for the DJI O4 FPV System

      1. Introduction to DJI O4 FPV System Troubleshooting The DJI O4 digital FPV system represents a significant step forward in FPV technology, offering enhanced image quality, lower latency, and improved range over its predecessors like the O3 system. ...

    • I Can't Update My DJI FPV Air Unit (Caddx Vista)

      If you are having issues with updating your DJI FPV air unit, or Caddx Vista Air Unit, this guide will help resolve some of the common issues we encounter with them If your Air Unit gets stuck during a firmware update: Try to flash different USB ...

    • Understanding Pre-Activated DJI O4 / O4 Pro Air Units in Your Pre-Built Drone

      Have You Noticed Your DJI O4 Air Unit is Already Activated? Here’s Why. If you've recently purchased a pre-built drone from us that's equipped with a DJI O4 or DJI O4 Pro Air Unit, you might notice upon setup that the Air Unit appears to be already ...

    • Caddx Vista / Nebula Troubleshooting Guide

      If you have any issues with your Caddx Vista Digital FPV system, this guide will help you to narrow down the source of the fault. Poor range with Caddx Vista If you have poor range or weak signal with your Caddx vista the first thing to check is that ...

    • DJI O4 Pro Camera Not Working (Black Screen in Goggles)

      If you experience a black screen in your goggles when using the DJI O4 Pro camera system, it's typically due to a physical issue like a pinched or damaged coaxial cable connecting the camera. Important Clarification: If you purchased the DJI O4 Pro ...