Video Transmission & Recording
Troubleshooting Guide for the DJI O4 FPV System
1. Introduction to DJI O4 FPV System Troubleshooting The DJI O4 digital FPV system represents a significant step forward in FPV technology, offering enhanced image quality, lower latency, and improved range over its predecessors like the O3 system. ...
Troubleshooting Guide for Analog FPV Drone Cameras
1. Introduction: Decoding Your FPV View The First-Person View (FPV) camera serves as the pilot's eyes, translating the drone's surroundings into a visual feed relayed to the goggles. A clear, stable, and reliable video signal is not merely a ...
Betaflight Camera Control Setup and Troubleshooting
Camera control via Betaflight is a fantastic way to adjust your camera settings from your R/C Controller, but it can sometimes be abit tricky to get working properly. Since this is an open source software feature, we are only able to provide limited ...
Betaflight VTX Tables and how to find what version of Smart Audio your VTX uses.
If you are stugging to setup the new VTX tables or get smart audio working properly on your betaflight board (betaflight V4.1+ ) then this video will help you. Betaflight VTX Tables in 5-minutes - How to discover your Smart Audio Version - YouTube ...
Poor FPV video range or bad VTX (video transmitter) signal - What to check.
A fairly common issue in FPV is that you are getting worse video signal that what you would expect. Fortunately, most of the time this is not a hardware fault, so this guide will walk you through some of the common issues that can cause bad video ...
Hot Small Drone (VTX / Video Transmitter is getting very hot)
Heat in small quads/drones is usually perfectly normal and harmless. However it is suggested that you never leave your VTX plugged in for long periouds (longer than 30 seconds) without any airflow over them, 99% of units on the market do have some ...