Propulsion & Power
Blheli ESC is Not Recognised - How to check the connections.
This article is a follow up from our ESC and Motor troubleshooting Guide, this article will help you to double check for any connection issues between your flight controller and ESC. Connect to BLheli Suite To check this the easiest thing to do is to ...
Motor & Propeller Orientation & Position (Drone won't take off, Flips out or throttles up on arming)
Introduction Motor and propeller issues are some of the most common problems we see with drones, and are the most common "brick wall" new drone operators run into. Luckily, there's a multitude of simple issues which can cause this - which also means ...
How to Check If Your ESC Is Broken (testing your MOSFETS)
How to Check If Your ESC Is Broken: A Comprehensive Guide Many FPV pilots have encountered a problem with their quadcopter motor/esc (Electronic Speed Controller) but don't know how to check if their ESC is broken. This can be a severe problem, as a ...
Faulty or Damaged Batteries - Request Info from Customer
I'm sorry to hear you're having an issue with your battery. We understand how frustrating this can be and we're here to help. Safety First: If you suspect your battery is faulty, please DO NOT use or attempt to charge it. This is crucial for your ...
How to troubleshoot your Motors and ESC (Betaflight)
Problem: One or more motors are not spinning up correctly when trying to fly your quadcopter. This is a fairly common issue pilots encounter with betaflight quads. Sometimes this could be due to an incorrect flight controller setting, bad ...
Lipo Faulty - Dead Cell or Low Voltage
Problem: Brand new Lipo battery had a dead cell (overall voltage significantly lower than advertised) or once of the cells have a low voltage (more than 1-2 Volts) Warning: If you suspect your battery is faulty do not use or attempt to charge your ...
Popular Articles
How do I test my new Flight Controller? (and why it's important)
Why you should test your FC before soldering So, you've just received a brand new, shiny, flight controller. Awesome! You're probably eager to get it installed and get up in the air, but hold your horses there - it's always best to test your ...
Mobula6 (Crazybee F4 Lite) settings are wiped, or lost bind to radio
Problem: Mobula6 (Crazybee F4 Lite) flight controller settings have all been wiped, and the SPI receiver has lost bind. Sometimes if your battery gets over discharged (below 3.0V) and you still try to fly your quadcopter by running the motors it can ...
What Does Backorder Mean?
A backorder means that the item you want to order (or have ordered) that is temporarily out of stock. When we receive more stock of this item, we will then send the order out to you, usually within 2-3 weeks. We offer backorders on some products so ...
How to calibrate the Voltage on ToolKit Rc chargers
The toolkit RC chargers pack alot of features and functionality at great prices, but we have found that many of them are not properly calibrated out of the box. This results in your lipos being under-charged. This guide applies to all of the ...
Lipo Faulty - Dead Cell or Low Voltage
Problem: Brand new Lipo battery had a dead cell (overall voltage significantly lower than advertised) or once of the cells have a low voltage (more than 1-2 Volts) Warning: If you suspect your battery is faulty do not use or attempt to charge your ...